How to Prevent Utility Sink Stains

How to Prevent Utility Sink Stains

You often find utility sinks in laundry rooms, basements, garages and mudrooms to manage bigger cleaning jobs which you can not manage in the bathtub or kitchen sinks. Utility sinks are manufactured from materials like stainless steel steel, fireclay and enamel-coated cast iron; the kind you select depends on your home’s design, the installation place and your budget. Since these sinks are utilitarian in character, they’re subject to staining. However, it is possible to prevent utility sink stains with appropriate maintenance.

Maintain your utility sink dry between uses. Be sure you shut off the tap or mend any tap leaks.

Scrub fiberglass utility sinks with a soft nylon scrub brush and a gentle disinfecting cleaner to prevent pink mildew stains. Rinse the disinfectant in the sink and dry it thoroughly.

Clean stainless steel utility sinks following every use. Towel them dry to prevent mineral deposits. Don’t permit food, metal cans or cast iron things sit at the sink, or allow soap or cleaners to dry on the surface. Utilize a soap-filled abrasive cleaning pad and scrub from the direction of this sink finish. Don’t abandon the cleaning pad on the sink, since this may create a rust stain.

Rinse enamel-coated cast iron or enamel-coated steel utility sinks following every use. Wipe the sink dry to prevent water rust stains. Use a mild abrasive cleaner to keep the surface clean. Place a sink guard in the bottom of the sink to keep things from staining the bottom of the sink.

Wipe molded and acrylic plastic utility sinks clean with a soft cloth after each use to keep stains from forming. Use an overall all-purpose cleaner to remove excess dirt and dirt. Don’t use abrasive or aerosol cleaners on such sinks.

Rinse and dry natural stone, cement and concrete stone utility sinks after every use to prevent stains. Avoid contact with nail polish, nail polish remover, oils, bleach and paint. Should you spill these goods in the sink, wipe them immediately since they may leave permanent stains. Clean with liquid dish washing detergent and a soft sponge to keep stains in the bay. You can clean mixture stone sinks with calcium, lime and rust remover to remove any calcium accumulation which could stain the sinks. Apply a matte silicone sealer to natural stone and concrete sinks every three months to protect the porous surface of the sinks from everyday stains.

Clean fireclay utility sinks with light synthetic or all-purpose cleaning products to keep them stain-free. Implement cleaning products with a soft, damp sponge and rinse immediately.

Wipe solid surface mixture utility sinks dry with a soft cloth after every use to get rid of the film that drying water can abandon on the sink’s surface. Keep the sinks tidy by using a nonabrasive scouring pad and nonabrasive cleaner. Rinse the cleaner in the surface and dry thoroughly.

See related

Comments are closed.