The best way to Caulk the Window Trim

The best way to Caulk the Window Trim

Whether you’re repainting, replacing a window, or changing the siding in your house, the caulking round the window trim is an extremely important aspect to get right, particularly with lap siding. Siding levels that are overlapping produce gaps that, if left un-treated, permit water to infiltrate the window across. Moreover, a well is required by a a spot of between 1/8 and 1/4 inch between the edge of the siding and the window trim needs therapy . When window trim caulking compounds use.

Scrape the medial side of the window trim alongside the siding as well as the quick edge of the lap siding using a paint scraper to remove free paint and old caulk. Inspect the window trim for dry-rot. Replace or repair broken trim. Clean the window trim using a rag as well as the siding edges across the window trim.

Pull the tip of the caulk tube gradually along the joint of the siding as well as the window trim, keeping the caulk gun at a 45-degree angle. Maintain constant pressure on the trigger while moving in a speed across the seam to produce a bead of caulk.

The gaps produced from the siding by slowing or halting your movement momentarily to enable caulk till it’s complete to drive to the gap. Resume your speed that is earlier.

Smooth by dragging your finger across the bead of caulk, and distribute the caulk to the gaps. Press any extra caulk in your finger in to each gap and smooth it. Inspect the caulk line that is finished to make sure coverage in most gaps. Add caulk as required.

Remove excess caulk using a damp rag, being cautious not to disturb the caulk line that is finished.

See related

Comments are closed.